Installation

PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION

1. INSTALL SEAT BELT CONTROL ECU

(a) Engage the 2 claws and install the seat belt control ECU.

2. INSTALL ECU INTEGRATION BOX RH Installation

3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Installation

4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

5. INSTALL COWL SIDE TRIM BOARD RH Installation

6. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.