Removal

LIGHTING (EXT): HAZARD WARNING SWITCH: REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions

1. POSITION FRONT WHEELS FACING STRAIGHT AHEAD

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

4. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

5. REMOVE STEERING PAD Removal

6. REMOVE STEERING WHEEL ASSEMBLY Removal

7. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

9. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Removal

10. REMOVE INSTRUMENT PANEL FINISH PANEL Removal

11. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL Removal

12. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY





(a) Disengage the 2 claws and hazard warning signal switch.