Installation

LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY





(a) Engage the claw, 2 guides and install the headlight dimmer switch, as shown in the illustration.

(b) Install the headlight dimmer switch with the clamp.





(c) Connect the connector.

2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Engage the claw and install the wiper switch.

(b) Connect the 2 connectors.

3. INSTALL SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY Installation

4. INSTALL UPPER STEERING COLUMN COVER Installation

5. INSTALL LOWER STEERING COLUMN COVER Installation

6. ADJUST SPIRAL CABLE Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSPECT STEERING WHEEL CENTER POINT

9. INSTALL STEERING PAD Installation

10. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

11. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

12. POSITION FRONT WHEELS FACING STRAIGHT AHEAD

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. INSPECT STEERING PAD Steering Pad

15. INSPECT SRS WARNING LIGHT

Diagnosis System