Disassembly

DOOR / HATCH: HOOD: DISASSEMBLY

1. REMOVE HOOD INSULATOR

(a) Remove the 5 clips.





(b) Disengage the 2 guides and remove the hood insulator.

2. REMOVE HOOD TO RADIATOR SUPPORT SEAL

(a) Disengage the 6 clips and remove the hood to radiator support seal.





3. REMOVE WASHER NOZZLE SUB-ASSEMBLY

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and separate the washer nozzle as shown in the illustration.





Text in Illustration





NOTICE:
Be careful not to damage the windshield.

(b) Disconnect the washer nozzle from the washer hose.

NOTICE:
Washer nozzles cannot be reused.

4. REMOVE WINDSHIELD WASHER HOSE

(a) Disengage the 5 clips and disconnect the washer hose.