Removal

METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL

1. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

4. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

5. REMOVE STEERING PAD Removal

6. REMOVE STEERING WHEEL ASSEMBLY Removal

7. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

10. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Removal

11. REMOVE INSTRUMENT SIDE PANEL LH Removal

12. REMOVE INSTRUMENT PANEL FINISH PANEL Removal

13. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL





(a) Disengage the 2 claws and 4 clips and separate the instrument cluster finish panel.

(b) Disengage the 11 clips and remove the No. 1 instrument cluster finish panel.

14. REMOVE COMBINATION METER ASSEMBLY

(a) Disengage the 4 screws.





(b) Pull the combination meter assembly, disconnect the connector, and remove the combination meter assembly.