Installation

1AR-FE INTAKE / EXHAUST: VACUUM SWITCHING VALVE (for ACIS): INSTALLATION

1. INSTALL VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)

(a) Install the vacuum switching valve assembly to the intake manifold with the bolt.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(b) Connect the 2 vacuum hoses to the vacuum switching valve assembly.

(c) Engage the wire harness clamp to the vacuum switching valve assembly.

(d) Connect the vacuum switching valve connector.

2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation