Operation CHARM: Car repair manuals for everyone.
Home >> Toyota Truck >> 2011 >> Sienna FWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Steering and Suspension >> Relays and Modules - Wheels and Tires >> Tire Pressure Monitor Receiver / Transponder >> Service and Repair >> Installation

Installation





TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER

(a) Engage the 2 tabs into the holes as shown in the illustration and install the tire pressure warning antenna and receiver.





(b) Install the bolt.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(c) Connect the connector to the tire pressure warning antenna and receiver.

2. INSTALL ROOF HEADLINING ASSEMBLY

Installation

3. INSPECT TIRE PRESSURE WARNING SYSTEM

Test Mode Procedure
pro multis · About Operation CHARM