Reassembly

DOOR / HATCH: BACK DOOR: REASSEMBLY

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH Installation

2. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

HINT
Use the same procedure as for the LH side Installation.

3. INSTALL LICENSE PLATE LIGHT ASSEMBLY Installation

4. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 10 Speakers) Installation

5. INSTALL BACK DOOR SIDE MALE STOPPER LH

(a) Install the back door side male stopper with the 2 bolts.





6. INSTALL BACK DOOR SIDE MALE STOPPER RH

HINT
Use the same procedure as for the LH side.

7. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door) Installation

8. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door) Installation

9. INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Back Door) Installation

10. INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Back Door) Installation

11. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Normal Angle Camera) Installation

12. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Wide Angle Camera) Installation

13. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY Installation

14. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

15. INSTALL DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door) Installation

16. INSTALL REAR WIPER MOTOR GROMMET Installation

17. INSTALL REAR WIPER MOTOR AND BRACKET ASSEMBLY Installation

18. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY Installation

19. INSTALL REAR SPOILER SUB-ASSEMBLY Installation

20. INSTALL POWER BACK DOOR WARNING BUZZER (w/ Power Back Door) Installation

21. INSTALL BACK DOOR INSIDE HANDLE

(a) Engage the 4 claws and install the back door inside handle.





22. INSTALL UPPER BACK DOOR STAY BRACKET

(a) Install the upper back door stay bracket with the 2 bolts and engage the clamp.





23. INSTALL BACK DOOR SIDE GARNISH LH (w/o Power Back Door)

(a) Engage the 2 clips and install the back door side garnish LH.





24. INSTALL BACK DOOR SIDE GARNISH LH (w/ Power Back Door)

(a) Engage the 2 clips and install the back door side garnish LH.





25. INSTALL POWER BACK DOOR ROD (w/ Power Back Door)

(a) Install the power back door rod and 2 stop rings.





26. INSTALL BACK DOOR SIDE GARNISH RH

(a) Engage the 3 clips and install the back door side garnish RH.





27. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

(a) Engage the 15 clips and 4 claws and install the back door trim board.





28. INSTALL BACK DOOR CENTER GARNISH

(a) Engage the 6 clips and 4 claws and install the back door center garnish.