Reassembly

INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

1. INSTALL ENGINE SWITCH Installation

2. INSTALL INSTRUMENT PANEL LOWER CUSHION





(a) Install the instrument panel lower cushion.

3. INSTALL NO. 3 INSTRUMENT PANEL CUSHION





(a) Install the No. 3 instrument panel cushion.

4. INSTALL NO. 2 INSTRUMENT PANEL CUSHION





(a) Install the No. 2 instrument panel cushion.

5. INSTALL NO. 1 INSTRUMENT PANEL CUSHION





(a) Install the No. 1 instrument panel cushion.

6. INSTALL INSTRUMENT CLUSTER FINISH PANEL REINFORCEMENT





(a) Install the instrument cluster finish panel reinforcement with the screw.

7. INSTALL ANTENNA CORD SUB-ASSEMBLY Installation

8. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation

9. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

(a) Engage the 2 claws and install the automatic light control sensor.

(b) Connect the connector.

10. INSTALL NO. 2 HEATER TO REGISTER DUCT

(a) Install the No. 2 heater to register duct with the 4 screws.

11. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Install the defroster nozzle with the 5 screws.

12. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

(a) Install the No. 2 side defroster nozzle duct with the 2 screws.

13. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Install the No. 1 side defroster nozzle duct with the 2 screws.

14. INSTALL NO. 1 HEATER TO REGISTER DUCT

(a) Install the No. 1 heater to register duct with the 3 screws.

15. INSTALL NO. 2 INSTRUMENT PANEL EXTENSION

(a) Install the No. 2 instrument panel extension with the screw.