Wireless Door Lock Control System (w/o Smart Key System)

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System): TERMINALS OF ECU

1. CHECK MAIN BODY ECU AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY





(a) Remove the main body ECU.

(b) Disconnect the main body ECU connectors.

(c) Measure the voltage and resistance according to the value(s) in the table below.

HINT
Measure the values on the wire harness side with the connector disconnected.





If the result is not as specified, there may be a malfunction on the wire harness side.

(d) Reconnect the main body ECU connectors.

(e) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the main body ECU may have a malfunction.