Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect the connectors.

(b) Install the headlight with the bolt and 2 screws.

Torque : 3.6 Nm (38 kgf-cm, 32 in-lbf) (for Bolt)

2. INSTALL FRONT BUMPER COVER

Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. PREPARE VEHICLE FOR HEADLIGHT AIMING ADJUSTMENT Adjustments

5. PREPARE FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments

6. PREPARE FOR HEADLIGHT AIMING (Using a screen) Adjustments

7. INSPECT HEADLIGHT AIMING Adjustments

8. ADJUST HEADLIGHT AIMING Adjustments