Part 2

NETWORKING: CAN COMMUNICATION SYSTEM: TERMINALS OF ECU - Continued

16. CHECK CENTER AIRBAG SENSOR ASSEMBLY





(a) Disconnect the D40 center airbag sensor assembly connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





17. CHECK POWER STEERING ECU

(a) Disconnect the D35 and D36 power steering ECU connectors.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





18. CHECK 4WD CONTROL ECU

(a) Disconnect the K1 4WD control ECU connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





19. CHECK COMBINATION METER





(a) Disconnect the D18 combination meter connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance: V Bus





Standard Resistance: MS Bus





20. CHECK DRIVING SUPPORT ECU (w/ Dynamic Radar Cruise Control System)

(a) Disconnect the A44 driving support ECU connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





21. CHECK AFS ECU (HEADLIGHT SWIVEL ECU) (w/ HID Headlight System)





(a) Disconnect the A45 AFS ECU (headlight swivel ECU) connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





22. CHECK SEAT BELT CONTROL ECU (w/ Pre-collision System)





(a) Disconnect the D83 and D84 seat belt control ECU connectors.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





23. CHECK PARKING ASSIST ECU (w/ Parking Assist Monitor System)





(a) Disconnect the D86 parking assist ECU connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





24. CHECK CLEARANCE WARNING ECU (w/ Intuitive Parking Assist System)





(a) Disconnect the D77 clearance warning ECU connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





25. CHECK POWER BACK DOOR UNIT (BACK DOOR ECU) (w/ Power Back Door)





(a) Disconnect the K14 power back door unit (back door ECU) connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





26. CHECK SLIDE DOOR MOTOR UNIT LH (w/ Power Slide Door)





(a) Disconnect the J9 slide door motor unit LH connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





27. CHECK SLIDE DOOR MOTOR UNIT RH (w/ Power Slide Door)





(a) Disconnect the I8 slide door motor unit RH connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





28. CHECK OUTER MIRROR CONTROL ECU ASSEMBLY LH (w/ Seat Position Memory)





(a) Disconnect the H2 outer mirror control ECU assembly LH connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





29. CHECK OUTER MIRROR CONTROL ECU ASSEMBLY RH (w/ Seat Position Memory)





(a) Disconnect the G3 outer mirror control ECU assembly RH connector.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance





30. CHECK POSITION CONTROL ECU AND SWITCH (w/ Seat Position Memory)





(a) Disconnect the Y8 and Y9 position control ECU and switch connectors.





(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration





Standard Resistance