Installation

SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Check that the ignition switch is off.

(b) Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Connect the 2 airbag connectors.





Text in Illustration





NOTICE:
Lock the locking button securely.

(d) Engage the 2 clamps.

2. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

(a) Engage the 10 hooks so that the connector side faces the outside of the vehicle, and install the front passenger airbag.

(b) Install the 2 screws.

3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

5. INSPECT SRS WARNING LIGHT

Diagnosis System