Installation
LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION
1. INSTALL STOP LIGHT SWITCH ASSEMBLY
Text in Illustration
(a) Install the stop light switch into the adjuster until it slightly touches the brake pedal.
HINT
Do not depress the brake pedal.
(1) Make a quarter turn clockwise to install the stop light switch.
Text in Illustration
HINT
* Do not depress the brake pedal.
* The turning torque for installing the stop light switch is as below.
Torque : 1.5 Nm (15 kgf-cm, 13 in-lbf) or less
(b) Check the stop light switch clearance.
Stop light switch clearance:
0.5 to 2.6 mm (0.020 to 0.102 in.)
(c) Connect the stop light switch connector to the stop light switch.