Installation

AXLE AND DIFFERENTIAL: STEERING KNUCKLE: INSTALLATION

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. INSTALL STEERING KNUCKLE

(a) Using SST and a press, install a new front axle hub bearing to the steering knuckle.





SST : 09950-60020

09951-00810

SST : 09950-70010

09951-07100

2. INSTALL FRONT DISC BRAKE DUST COVER

(a) Install the front disc brake dust cover to the steering knuckle with the 4 bolts.

Torque : 8.3 Nm (85 kgf-cm, 73 in-lbf)

3. INSTALL FRONT AXLE HUB SUB-ASSEMBLY Installation

4. INSTALL FRONT AXLE HUB HOLE SNAP RING Installation

5. INSTALL FRONT NO. 1 WHEEL BEARING DUST DEFLECTOR Installation

6. INSTALL FRONT LOWER BALL JOINT Installation

7. INSTALL FRONT AXLE ASSEMBLY

Installation