Removal

SEAT: REAR SEAT ASSEMBLY (for RH Side): REMOVAL

1. REMOVE REAR SEAT CUSHION ASSEMBLY

(a) Remove the 2 bolts and rear seat cushion.





2. REMOVE REAR SEAT BACK HINGE COVER

(a) Using a screwdriver with its tip taped in protective tape, disengage the 3 claws and remove the rear seat back hinge cover.





HINT
Follow the same procedures as for the opposite side.

3. REMOVE REAR SEAT BACK ASSEMBLY

(a) Remove the bolt, rear seat belt outer center and floor anchor of the rear seat belt inner.





(b) Remove the 2 bolts and rear seat back.





4. REMOVE REAR SEAT BACK HINGE SUB-ASSEMBLY

(a) Remove the 2 bolts and rear seat back hinge.