Disassembly

BRAKE: FRONT BRAKE (for 2WD): DISASSEMBLY

1. REMOVE CYLINDER BOOT





(a) Using a screwdriver, remove the cylinder boot.

2. REMOVE FRONT DISC BRAKE PISTON





(a) Place a shop rag or equivalent between the disc brake piston and disc brake cylinder.

(b) Use compressed air to remove the disc brake piston from the disc brake cylinder.

CAUTION:
Be careful not to place your fingers in front of the piston when using compressed air.

NOTICE:
Be careful not to spatter the brake fluid.

3. REMOVE PISTON SEAL





(a) Using a screwdriver, remove the piston seal from the front disc brake cylinder.

NOTICE:
Be careful not to damage the inner cylinder or cylinder groove.

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG