Cylinder Head Assembly: Testing and Inspection

2TR-FE ENGINE MECHANICAL: CYLINDER HEAD: INSPECTION

1. INSPECT CYLINDER HEAD SET BOLT





(a) Using vernier calipers, measure the minimum diameter of the elongated thread at the measuring point.

Standard outside diameter:

10.76 to 10.97 mm (0.4236 to 0.4319 in.)

Minimum outside diameter:

10.40 mm (0.4094 in.)

HINT
If a visual check reveals no excessively thin areas, check the center of the bolt (see illustration) and find the area that has the smallest diameter.