Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Install the 2 light bulbs into the 2 light sockets.

(b) Connect the tail and stop light bulb connector.

(c) To install the 3 light bulb sockets, turn them in the direction indicated by the arrow in the illustration.





(d) Install the wire harness clamp.

(e) Connect the connector, and then install the tail light (rear combination light) assembly LH with the 2 bolts.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)