Canada - M/T - Clutch Pedal Squeak/Creak When Operated

T-TCI-3890

October 29, 2012

CLUTCH PEDAL SQUEAK/CREAK NOISE

Service Category
Drivetrain

Section
Clutch

Market
Canada





APPLICABILITY:

INTRODUCTION:

Some 2005 - 2012 model year Tacoma vehicles may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released. Changes have been made to the clutch pedal and clutch master cylinder assembly to address this condition.

PRODUCTION CHANGE INFORMATION:





This TSB applies to vehicles produced BEFORE the Production Change Effective VINs shown.





WARRANTY INFORMATION:





PARTS INFORMATION:








REQUIRED TOOLS & EQUIPMENT:

REPAIR PROCEDURE:

1. Confirm there is a squeak or creak noise from the clutch pedal assembly when it is depressed or released.

Is the noise coming from the clutch pedal assembly?

^ YES-Go to step 2.

^ NO - This bulletin does NOT apply. Refer to the applicable Repair Manual for diagnosis.

NOTE

Be sure the noise is from the clutch pedal assembly, and not from other components related to the clutch system.





2. Replace the clutch pedal and clutch master cylinder assembly.





Refer to the ETAS/TIS library applicable model year Tacoma Repair Manual:

3. Confirm the repair.

NOTE:
Issue of the Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.

© 2012 Toyota Motor Sales, Canada