Installation

A340E AUTOMATIC TRANSMISSION: ATF TEMPERATURE SENSOR: INSTALLATION

1. INSTALL TEMPERATURE SENSOR

(a) Coat a new O-ring with Toyota Genuine ATF Type T-IV or equivalent and install it onto the temperature sensor.

(b) Install the temperature sensor.

Torque : 29 Nm (300 kgf-cm, 22 ft-lbf)

(c) Connect the temperature sensor connector.

2. CONNECT NO. 1 OIL COOLER INLET TUBE





(a) Using union nut wrench, tighten oil cooler inlet tube No. 1.

Torque : 34 Nm (350 kgf-cm, 25 ft-lbf)

(b) Install the 3 clamps and 3 bolts.





Torque : 14 Nm (143 kgf-cm, 10 ft-lbf) for bolt A

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf) for bolt B

3. INSPECT AUTOMATIC TRANSMISSION FLUID A340E Automatic Transmission

4. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK