Reassembly

R155 MANUAL TRANSMISSION: COUNTER GEAR: REASSEMBLY

1. INSTALL COUNTER GEAR FRONT BEARING OR ROLLER





(a) Using SST and a press, install the counter gear front bearing onto the counter gear.

SST : 09515-10010

Install it so that the snap ring groove of the bearing faces to the front side.

2. INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING





(a) Select the correct counter gear front bearing No. 2 snap ring so that the clearance between the counter gear and No. 2 counter gear front bearing snap ring No. 2 is within the specified values. Using a brass bar and a hammer, install it onto the counter gear.

Standard clearance:

0.1 mm (0.0039 in.) or less