Ball Joint

FRONT LOWER SUSPENSION ARM

Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and take the torque reading on the 5th turn.

Torque 3.0 Nm (31 kgf-cm, 27 in-lbf) or less


FRONT UPPER SUSPENSION ARM

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the 5th turn.

Torque 4.5 Nm (46 kgf-cm, 40 in-lbf) or less