Installation

OTHER SYSTEM: POWER OUTLET SOCKET: INSTALLATION

1. INSTALL POWER POINT SOCKET ASSEMBLY

(a) Align the socket with the notch on the power point socket cover, and push the power point socket assembly firmly into the cover to install it.

2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY Installation

3. INSTALL LOWER INSTRUMENT PANEL LH Installation

4. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Installation

7. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Reassembly

8. INSTALL RADIO RECEIVER ASSEMBLY Installation

9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation

10. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) Installation

11. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) Installation

12. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) Installation

13. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) Installation

14. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) Installation

15. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) Installation

16. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) Installation

17. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) Installation

18. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) Installation

19. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) Installation

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)