Installation

SUSPENSION: FRONT STABILIZER BAR (for 2WD): INSTALLATION

1. INSTALL FRONT STABILIZER BAR

2. INSTALL FRONT STABILIZER LOWER BRACKET BUSH LH





(a) Install the front stabilizer lower bracket bush.

HINT
* Install the bush onto the inner side of the bush stopper on the stabilizer bar.
* Install the bush onto the stabilizer bar with its cut line facing to the front.

3. INSTALL FRONT STABILIZER LOWER BRACKET BUSH RH

HINT
The installation procedure for the RH side is the same as that for the LH side.

4. INSTALL FRONT STABILIZER BRACKET NO. 1 LH





(a) Install the front stabilizer bracket with the 2 bolts.

Torque : 21 Nm (214 kgf-cm, 16 ft-lbf)

5. INSTALL FRONT STABILIZER BRACKET NO. 1 RH

HINT
The installation procedure for the RH side is the same as that for the LH side.

6. INSTALL FRONT STABILIZER LINK ASSEMBLY LH





(a) Install the front stabilizer link LH with the 2 nuts, 2 cushions and 2 retainers.

Nut A - Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)

Nut B - Torque : 69 Nm (704 kgf-cm, 51 ft-lbf)

HINT
If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.

7. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT
The installation procedure for the RH side is the same as that for the LH side.

8. INSTALL FRONT WHEELS

Torque : 113 Nm (1,152 kgf-cm, 83 ft-lbf)