Reassembly

SEAT: REAR SEAT ASSEMBLY (for LH Side): REASSEMBLY

CAUTION:
Wear protective gloves. Sharp surface on the rear seat back frame could cause injuries to your hands.

1. INSTALL REAR SEAT BACK COVER

(a) Using hog ring pliers, install the rear seat back cover with new hog rings.





NOTICE:
* Do not contaminate or scratch the rear seat back cover.
* When installing the hog rings, minimize wrinkles as far as possible.

2. INSTALL REAR SEAT LOCK HANDLE

(a) Install the rear seat lock handle onto the rear seat back lock.





3. INSTALL REAR SEAT BACK LOCK ASSEMBLY

(a) Install the rear seat back lock with the 2 bolts.





Torque : 30 Nm (305 kgf-cm, 22 ft-lbf)

4. INSTALL REAR SEAT BACK FRAME SUB-ASSEMBLY

(a) Install the rear seat back spring into the rear seat back pad.





(b) Using hog ring pliers, install new hog rings.

5. INSTALL REAR SEAT HEADREST SUPPORT





HINT
Follow the same procedures as for the opposite side.

(a) Engage the 2 claws and install the front seat headrest support.

6. INSTALL REAR SEAT BACK BOARD SUB-ASSEMBLY

(a) Engage the 4 claws and install the rear seat back board.





(b) Tighten the 2 screws.

7. INSTALL REAR SEAT HEADREST ASSEMBLY

(a) Disengage the lock button of the rear seat headrest support and install the rear seat headrest.





8. INSTALL REAR SEAT CUSHION COVER

(a) Using hog ring pliers, install the rear seat cushion cover with new hog rings.





NOTICE:
* Do not contaminate or scratch the rear seat cushion cover.
* When installing the hog rings, minimize wrinkles as far as possible.

9. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY

(a) Engage the hook and install the rear seat cushion frame.





10. INSTALL REAR SEAT CUSHION HINGE SUB-ASSEMBLY





HINT
Follow the same procedures as for the opposite side.

(a) Install the rear seat cushion hinge with the bolts.

Torque : 21 Nm (215 kgf-cm, 16 ft-lbf)

11. INSTALL REAR SEAT HEADREST HOLDER





HINT
Follow the same procedures as for the opposite side.

(a) Engage the 2 claws and install the rear seat headrest holder.

12. INSTALL REAR SEAT CUSHION BAND

(a) Install the rear seat cushion band with the screw.