Brake - General Maintenance

MAINTENANCE: BRAKE: GENERAL MAINTENANCE

1. INSPECT BRAKE LINE PIPES AND HOSES





HINT
Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning.

(a) Check all the brake lines and hoses for:

Damage

Wear

Deformation

Cracks

Corrosion

Leaks

Bends

Twists

(b) Check all the clamps for tightness and the connections for leakage.

(c) Check if the hoses and lines are not near sharp edges, moving parts and the exhaust system.

(d) Check if the lines are installed pass through the center of the grommets.

2. INSPECT FRONT BRAKE PADS AND DISCS





HINT
* 2WD:
* 4WD and Pre-runner: Testing and Inspection
* If a squealing or scraping noise is heard from the brake while driving, check the pad wear indicator.
* If there are traces of the indicator contacting the disc rotor, the disc pad should be replaced.

3. INSPECT REAR BRAKE DRUM

HINT
Testing and Inspection

4. INSPECT BRAKE FLUID

Fluid:

SAE J1703 or FMVSS No. 116 DOT3

HINT
* for Hydraulic Brake Booster Brake Fluid (for Hydraulic Brake Booster)
* for Vacuum Brake Booster Brake Fluid (for Vacuum Brake Booster)