Occupant Classification System (for Bench Seat Type)

SUPPLEMENTAL RESTRAINT SYSTEM: OCCUPANT CLASSIFICATION SYSTEM (for Bench Seat Type): PRECAUTION

1. INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT

(a) Perform the zero point calibration and sensitivity check if any of the following conditions apply.

The occupant classification ECU is replaced.

Accessories (seatback tray and seat cover, etc.) are installed.

The front passenger seat is removed from the vehicle.

The passenger airbag ON/OFF indicator indicates OFF when the front passenger seat is not occupied.

The vehicle is brought to the workshop for repair due to an accident or a collision.

NOTICE:
When an accident vehicle is brought into the workshop for repair, check the flatness of the floor where the front passenger seat is mounted. If the flatness is not within +- 3.0 mm (0.118 in.), adjust it to the specified range.