Reassembly

R155 MANUAL TRANSMISSION: INPUT SHAFT: REASSEMBLY

1. INSTALL INPUT SHAFT FRONT BEARING





(a) Using SST and a press, install a new input shaft front bearing FR onto the input shaft.

SST : 09950-60010

09951-00570

SST : 09950-70010

09951-07100

NOTICE:
Install the input shaft front bearing with the snap ring groove facing to the front.

2. INSTALL FRONT BEARING SHAFT SNAP RING





(a) Select the correct input shaft front bearing snap ring so that the clearance between the input shaft and input shaft front bearing is within the specified values.

Standard clearance:

0.1 mm (0.0039 in.) or less





3. INSTALL INPUT SHAFT BEARING





(a) Apply gear oil to the input shaft bearing and install it onto the input shaft.

4. INSTALL NO. 2 SYNCHRONIZER RING





(a) Apply gear oil to synchronizer ring No. 2, and install it onto the input shaft.