Operation CHARM: Car repair manuals for everyone.

Installation





ENGINE IMMOBILISER: TRANSPONDER KEY ECU: INSTALLATION

1. INSTALL REINFORCEMENT ASSEMBLY (w/ Bracket)

(a) Insert the reinforcement hook into the holes of the bracket, and temporarily install the reinforcement.

(b) Install the instrument panel reinforcement with the 7 bolts.

(c) Install the 2 caps.





(d) Install the 5 bolts.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

NOTICE:
Tighten the bolts in the order shown in the illustration to install the air conditioning unit assembly.

(e) Engage the 20 clamps.





(f) Connect the connector.

(g) Connect the 2 airbag connectors Service Precautions.

(h) Install the 3 bolts.





(i) Engage the 2 clamps and connect the 6 connectors to the air conditioning unit assembly.





2. INSTALL TRANSPONDER KEY ECU

(a) Install the transponder key ECU with the nut.





(b) Connect the connector.

3. INSTALL TRANSPONDER KEY BRACKET (w/ Bracket)

(a) Clean the 3 screw holes.

(b) Install the transponder key bracket with 3 new screws.





4. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY (w/ Bracket) Installation

5. INSTALL DRIVER SIDE JUNCTION BLOCK (w/ Bracket) Installation

6. INSTALL ECM (for 2TR-FE w/ Bracket) Installation

7. INSTALL ECM (for 1GR-FE w/ Bracket) Installation

8. INSTALL PARKING BRAKE CONTROL LEVER ASSEMBLY (for Manual Transmission w/ Bracket) Installation

9. INSTALL STEERING COLUMN ASSEMBLY (w/ Bracket) Installation

10. INSTALL STEERING SLIDING YOKE (w/ Bracket) Installation

11. INSTALL STEERING COLUMN HOLE COVER (w/ Bracket) Installation

12. INSTALL NO. 1 INSTRUMENT PANEL BRACE MOUNTING BRACKET (w/ Bracket) Installation

13. INSTALL AIR DUCT ASSEMBLY RH (w/ Bracket) Installation

14. INSTALL AIR DUCT ASSEMBLY LH (w/ Bracket) Installation

15. INSTALL NO. 1 REAR AIR DUCT (for Double Cab w/ Bracket) Installation

16. INSTALL NO. 2 REAR AIR DUCT (for Double Cab w/ Bracket) Installation

17. INSTALL NO. 3 HEATER TO REGISTER DUCT (w/ Bracket) Installation

18. INSTALL NO. 1 HEATER TO REGISTER DUCT Installation

19. INSTALL INSTRUMENT PANEL SAFETY PAD

(a) Install the instrument panel safety pad Installation.