Data List / Active Test

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster): DATA LIST / ACTIVE TEST

1. DATA LIST

HINT
With Techstream connected to the DLC3 and the ignition switch in the ON position, the ABS, TRAC and VSC data list can be displayed. Follow the prompts on the tester screen to access the Data List.

ABS/VSC/TRAC













2. ACTIVE TEST

HINT
Performing the Active Test using Techstream allows relays and actuators to be operated without removing any parts. Performing the Active Test as the first step of troubleshooting is one method of shortening diagnostic time.

It is possible to display the Data List during the Active Test.

(a) Connect Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) According to the display on the tester, perform the Active Test.

HINT
The ignition switch must be turned to the ON to proceed to the Active Test using Techstream.

ABS/VSC/TRAC