Installation

LIGHTING: HEADLIGHT ASSEMBLY: INSTALLATION

1. INSTALL NO. 1 HEADLIGHT, BULB

(a) Install the No. 1 headlight bulb.

(b) Lock the set spring by moving it in the direction indicated by the arrow in the illustration.

2. INSTALL CLEARANCE LIGHT BULB

(a) Install the clearance light bulb into the light socket.

(b) To install the clearance light bulb socket and bulb, turn them in the direction indicated by the arrow in the illustration.

3. INSTALL FRONT TURN SIGNAL LIGHT BULB

(a) Install the front turn signal light bulb into the light socket.

(b) To install the front turn signal light bulb socket and bulb, turn them in the direction indicated by the arrow in the illustration.

4. INSTALL HEADLIGHT ASSEMBLY

(a) Connect the 3 connectors.

(b) Install the LH headlight assembly with the bolt and 3 screws.

Torque : 2.0 Nm (20 kgf-cm, 17 in-lbf)

5. INSTALL FRONT BUMPER FILLER Installation

6. INSTALL FRONT BUMPER COVER Installation

7. INSTALL RADIATOR GRILLE Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

9. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT Adjustments

10. PREPARATION FOR HEADLIGHT AIMING (for Using a Tester) Adjustments

11. PREPARATION FOR HEADLIGHT AIMING (for Using a Screen) Adjustments

12. HEADLIGHT AIMING INSPECTION Adjustments

13. HEADLIGHT AIMING ADJUSTMENT Adjustments