Reassembly

AXLE: FRONT AXLE HUB (for 4WD and Pre-Runner): REASSEMBLY

1. INSTALL FRONT AXLE HUB OIL SEAL





(a) Using a brass bar and a hammer, install a new front axle hub oil seal.

NOTICE:
Do not damage the oil seal.

2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY





(a) Using SST and a press, install a new bearing onto the front axle hub.

SST : 09649-17010

3. INSTALL FRONT AXLE HUB





(a) Apply MP grease to a new O-ring.

(b) Install the new O-ring onto the axle hub.

(c) Install the dust cover and axle hub onto the steering knuckle with the 4 bolts.

Torque : 80 Nm (816 kgf-cm, 59 ft-lbf)

4. INSTALL FRONT WHEEL ADJUSTING NUT (for Pre-Runner)





(a) Using SST, install a new front wheel adjusting nut.

SST : 09318-12010

Torque : 275 Nm (2,804 kgf-cm, 203 ft-lbf)

5. INSTALL FRONT AXLE HUB OIL SEAL (for 4WD)





(a) Using SST and a press, install a new front axle hub oil seal.

SST : 09527-17011

SST : 09950-70010

09951-07100

SST : 09951-01000

6. INSTALL KNUCKLE GREASE RETAINER CAP (for Pre-Runner)





(a) Using a brass bar and a hammer, install a new knuckle grease retainer cap.

NOTICE:
Do not damage the knuckle grease retainer cap.