Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR (for Double Cab): REMOVAL

HINT
Use the same procedures for the RH side and LH side.

1. PRECAUTION

Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.

3. REMOVE FRONT DOOR SCUFF PLATE LH Removal

4. REMOVE REAR DOOR SCUFF PLATE LH Removal

5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH Removal

7. REMOVE LAP BELT OUTER ANCHOR COVER Removal

8. REMOVE CENTER PILLAR LOWER GARNISH LH Removal

9. REMOVE SIDE AIRBAG SENSOR





(a) Remove the bolt and the side airbag sensor.

(b) Disconnect the connector from the side airbag sensor.