Removal

SUSPENSION: REAR STABILIZER BAR (for Sport Suspension Package): REMOVAL

1. REMOVE REAR WHEEL

2. REMOVE REAR STABILIZER LINK ASSEMBLY LH





(a) Remove the 2 nuts and stabilizer link (LH side).

HINT
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.

3. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT
The removal procedure for the RH side is the same as that for the LH side.

4. REMOVE REAR STABILIZER BAR





(a) Remove the 4 bolts, 2 stabilizer brackets and stabilizer bar.

(b) Remove the 2 stabilizer bushes from the stabilizer bar.