Installation

VF2BM TRANSFER: TRANSFER ASSEMBLY: INSTALLATION

1. INSTALL TRANSFER ASSEMBLY





(a) Install the transfer assembly with the 8 bolts.

Torque : 24 Nm (244 kgf-cm, 17 ft-lbf)

NOTICE:
Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

2. INSTALL MANUAL TRANSMISSION ASSEMBLY (for R155F)



3. INSTALL MANUAL TRANSMISSION ASSEMBLY (for RA60F)

Installation

4. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (for A340F)



5. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (for A750F)

Installation

6. INSTALL TRANSFER CASE LOWER PROTECTOR





(a) Install the 4 bolts and the transfer case lower protector.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

7. ADD TRANSFER OIL

8. INSPECT TRANSFER OIL Adjustments

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

10. CHECK FOR TRANSFER OIL LEAKAGE

11. CHECK FOR EXHAUST GAS LEAKAGE