Installation

1GR-FE EMISSION CONTROL: HEATED OXYGEN SENSOR: INSTALLATION

1. INSTALL HEATED OXYGEN SENSOR

(a) Using SST, install the 2 heated oxygen sensors onto the exhaust pipe.

SST : 09224-00010

Torque : 44 Nm (449 kgf-cm, 33 ft-lbf)





(b) Connect the 2 heated oxygen sensor connectors.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

3. CHECK FOR EXHAUST GAS LEAKAGE