Installation

1GR-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION

1. INSTALL ECM BRACKET

(a) Install the ECM bracket with the 2 screws.





Torque : 3.0 Nm (32 kgf-cm, 28 in-lbf)

2. INSTALL NO. 2 ECM BRACKET

(a) Install the No. 2 ECM bracket with the 2 screws.





Torque : 3.0 Nm (32 kgf-cm, 28 in-lbf)

3. INSTALL NO. 2 JUNCTION BLOCK

(a) Engage the claw and install the No. 2 junction block.





(b) Install the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

4. INSTALL ECM

(a) Install the ECM with the nut and 2 bolts





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(b) Connect the 6 No. 2 junction block connectors, 6 ECM connectors and wire harness clamp.





5. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER RH Installation

6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation