Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Install the tire pressure warning ECU with the 2 screws.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the connector.

2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY Installation

3. INSTALL LOWER INSTRUMENT PANEL LH Installation

4. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH Installation

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

6. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY Installation

7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

8. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Installation

9. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Reassembly

10. INSTALL RADIO RECEIVER ASSEMBLY Installation

11. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation

12. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) Installation

13. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) Installation

14. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) Installation

15. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) Installation

16. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) Installation

17. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) Installation

18. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) Installation

19. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) Installation

20. INSTALL INSTRUMENT PANEL HOLE COVER (for Manual Transmission) Installation

21. INSTALL INSTRUMENT PANEL UNDER TRAY (for Automatic Transmission) Installation

22. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab) Installation

23. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab) Installation

24. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab) Installation

25. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) Installation

26. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab) Installation

27. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab) Installation

28. INSTALL FRONT FLOOR FOOTREST Installation

29. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

Service Precautions

30. REGISTER TRANSMITTER ID

(a) Register the transmitter ID Registration.

31. PERFORM INITIALIZATION (for Tire Pressure Warning System)

(a) When the ECU is replaced, perform initialization Initialization.