Removal

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR (for Double Cab): REMOVAL

HINT
Use the same procedures for RH side and LH side.

1. PRECAUTION

Service Precautions

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.

3. REMOVE REAR SEAT BACK HINGE COVER Removal

4. REMOVE REAR SEAT BACK ASSEMBLY LH Removal

5. REMOVE REAR SEAT BACK HINGE SUB-ASSEMBLY LH Removal

6. REMOVE REAR DOOR SCUFF PLATE LH Removal

7. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH Removal

8. REMOVE LUGGAGE COMPARTMENT SIDE TRAY Removal

9. REMOVE QUARTER TRIM LOWER PANEL LH Removal

10. REMOVE QUARTER INSIDE TRIM BOARD LH Removal

11. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH Removal

12. REMOVE REAR AIRBAG SENSOR





(a) Disconnect the connector from the rear airbag sensor.

(b) Remove the nut and the rear airbag sensor.