Removal

OTHER SYSTEM: POWER OUTLET SOCKET: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) Removal

3. REMOVE INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) Removal

4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) Removal

5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) Removal

6. REMOVE REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) Removal

7. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) Removal

8. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) Removal

9. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) Removal

10. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) Removal

11. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) Removal

12. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal

13. REMOVE RADIO RECEIVER ASSEMBLY Removal

14. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Disassembly

15. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

16. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

17. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY Removal

18. REMOVE LOWER INSTRUMENT PANEL LH Removal

19. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY Removal

20. REMOVE POWER POINT SOCKET ASSEMBLY





(a) Turn the socket counterclockwise as shown in the illustration, disengage the claw between the socket and the power point socket cover, and push the socket out towards the room side.

(b) Align the socket with the notch on the power point socket cover, and remove the power point socket assembly on the room side.