Installation

OTHER SYSTEM: REAR POWER OUTLET SOCKET: INSTALLATION

1. INSTALL POWER OUTLET SOCKET ASSEMBLY





(a) Install the clamp.

(b) Connect the connector.

(c) Using a torx socket wrench T30, install the 4 screws and the power outlet socket assembly.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

NOTICE:
Install the screws in the order shown the illustration.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)