Installation

A750E AUTOMATIC TRANSMISSION: FLOOR SHIFT ASSEMBLY: INSTALLATION

1. INSTALL FLOOR SHIFT ASSEMBLY





(a) Install the floor shift with the 4 bolts.

Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)

(b) Connect the 2 clamps and 2 connectors.

2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY





(a) CABLE TYPE:

(1) Connect the transmission control cable with the clip to floor shift assembly.

(2) Install the transmission control cable onto the floor shift assembly.

3. INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY





(a) ROD TYPE:

(1) Install the floor shift gear shifting rod with nut.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

4. INSTALL FRONT CONSOLE BOX (for Bench Seat Type) Installation

5. INSTALL FRONT CONSOLE BOX (for Separate Seat Type) Installation

6. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Separate Seat Type) Installation

7. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) Installation

8. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Separate Seat Type) Installation

9. ADJUST SHIFT LEVER POSITION A750E Automatic Transmission

10. INSPECT SHIFT LEVER POSITION A750E Automatic Transmission