Rear View Monitor System (w/ Navigation System)

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM (w/ Navigation System): TERMINALS OF ECU

1. CHECK TELEVISION CAMERA ASSEMBLY





(a) Disconnect the X1 television camera assembly connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the X1 television camera assembly connector.

(d) Measure the waveform according to the value(s) in the table below.





If the result is not as specified, the television camera assembly may have a malfunction.

(e) Using an oscilloscope, check the waveform.





Measurement Condition





2. CHECK NAVIGATION RECEIVER ASSEMBLY (w/ USB Audio System) Navigation System (w/ USB Audio System)

3. CHECK NAVIGATION RECEIVER ASSEMBLY (w/o USB Audio System) Navigation System (w/o USB Audio System)