Installation

LIGHTING: FOG LIGHT ASSEMBLY: INSTALLATION

HINT
* Use the same procedures for the RH and LH side.
* The procedures listed below are for the LH side.

1. INSTALL FOG LIGHT ASSEMBLY LH

(a) for Steel Type Bumper:





(1) Attach the 2 claws to install the fog light.

(2) Attach the tabs on the fog light aiming screw to the bumper.

(3) Connect the connector.

(b) for Resin Type Bumper:





(1) Attach the 2 claws to install the fog light.

(2) Attach the tabs on the fog light aiming screw to the bumper.

(3) Connect the connector.

2. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH