Installation

1GR-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: INSTALLATION

1. INSTALL KNOCK SENSOR

(a) Install the 2 sensors with the 2 bolts as shown in the illustration.





Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

Text in Illustration





(b) Connect the 2 sensor connectors.

2. INSTALL NO. 1 WATER OUTLET PIPE

(a) Install the water outlet pipe with the 2 nuts and bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Attach the 3 wire harness clamps.

3. INSTALL CYLINDER HEAD SUB-ASSEMBLY (for Bank 1)

Installation