Installation

1GR-FE EMISSION CONTROL: AIR INJECTION DRIVER: INSTALLATION

1. INSTALL AIR INJECTION CONTROL DRIVER

(a) Install the air injection control driver with the 2 screws.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

2. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY

(a) Install the air injection control driver assembly with the 3 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Attach the 2 wire harness clamps.

(c) Connect the wire harness to the air injection control bracket with the bolt.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(d) Connect the 2 air injection control driver connectors.