Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL CLEARANCE WARNING ECU ASSEMBLY

(a) Install the clearance warning ECU to the bracket with the 2 nuts.





NOTICE:
* Avoid any impact to the clearance warning ECU.
* Do not drop the ECU. If it is dropped, replace it with a new one.

2. INSTALL CLEARANCE WARNING ECU WITH BRACKET

(a) Install the ECU with bracket with the nut and bolt.





(b) Connect the ECU connectors and attach the harness clamp.

NOTICE:
Do not apply excessive force to the wire harnesses.

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Installation

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

5. INSTALL LOWER INSTRUMENT PANEL Installation

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

9. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Installation.