Removal

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE INSTRUMENT SIDE PANEL RH Removal

3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

4. REMOVE LOWER INSTRUMENT PANEL Removal

5. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Removal

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Removal

7. REMOVE CLEARANCE WARNING ECU WITH BRACKET

(a) Disconnect the ECU connectors and detach the harness clamp.





NOTICE:
Do not apply excessive force to the wire harnesses.

(b) Remove the bolt, nut and ECU with bracket.

8. REMOVE CLEARANCE WARNING ECU ASSEMBLY

(a) Remove the 2 nuts and clearance warning ECU from the bracket.





NOTICE:
* Avoid any impact to the clearance warning ECU.
* Do not drop the ECU. If it is dropped, replace it with a new one.