Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH

(a) Install the switch, as shown in the illustration.





(b) Install the 2 screws.





(c) Connect the connector.

2. INSTALL STEERING PAD (w/ Steering Pad Switch) Installation

3. INSTALL STEERING PAD (w/o Steering Pad Switch) Installation

4. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

5. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.